duramax.parts

As an Amazon Associate and an eBay Partner Network affiliate, we earn from qualifying purchases. Learn more

Head Studs & Gaskets For The GM Duramax

ARP head studs, head gasket sets, and top-end sealing hardware — the foundation of any high-boost Duramax build to keep gaskets sealed under elevated cylinder pressure.

4 guides · eBay Motors searches

Shop Head Studs & Gaskets Live eBay Motors Searches, Seller-Set Prices

Browse every live “duramax head studs” listing on eBay →

We track no Amazon listing in head studs & gaskets today; new parts are added daily. The eBay Motors shelf above is the live market for head studs & gaskets for the GM Duramax.

On a Duramax the gasket rarely fails first — the clamping load does. The factory holds the heads down with torque-to-yield bolts that are already stretched near their limit.

Match Head Studs & Gaskets To Your Engine

GenerationWhat It Means For This Part
LB7 (2001–2004)Pulling the heads is already the job when the injectors go, since they live under the valve covers. If you're in there, that's the moment for studs and fresh gaskets.
LLY / LBZ / LMM (2004.5–2010)These respond hugely to tuning, which is exactly what puts head gaskets at risk. Studs are near-universal advice once the tune and fueling come up.
LML (2011–2016)Strong from the factory, but the same rule applies as boost climbs on a serious build.
L5P (2017+)The stoutest top end of the family stock. Big-power L5P builds still add studs as cylinder pressure rises.

Before You Buy

  • Bubbles or pressure in the coolant overflow tank at idle is the tell-tale — combustion gas in the cooling system.
  • If you're already in there, or you plan to add power, do the studs. The labor is the expensive part and you only want to pay it once.
  • ARP is the standard: studs clamp harder and more consistently than a TTY bolt, and unlike a bolt they can be re-torqued.

Not sure which engine you have? Decode it from the eighth digit of your VIN with the Duramax VIN & engine code decoder, or map your year and platform in the generations & fitment guide.

Head Studs & Gaskets: Common Questions

Do I need head studs, or will head bolts work?
A stock, healthy truck driven gently reseals fine on factory-style TTY bolts. If you tune, run more boost, or tow heavy, studs are the smarter spend — they apply a higher, more consistent clamping load and can be re-torqued, which is what keeps the head from lifting when cylinder pressure spikes.
How much power before a Duramax needs studs?
There's no single number — it depends on tune aggressiveness, fueling, and how hard the truck is worked. The practical rule is that a stock-bolt truck is happy at stock-to-mild power and gets nervous as boost climbs with a serious tune, bigger injectors, or a larger turbo. Owners building past a mild towing tune generally add studs proactively.
What else should I replace while the heads are off?
Glow plugs, because they thread into the heads. Injectors, if they're high-mileage or showing balance-rate drift. Fresh fuel filtration and fluids so debris doesn't reach what you just rebuilt. And flush the cooling system if coolant and combustion gas mixed.